Polymaster Filters and Tank Accessories

Leaf Eater Rainhead

These work extremely well mounted directly below the downpipe. Primary screen diverts leaves from the gutter to the ground with a secondary s/steel screen to stop insects. A smaller Leaf Beater Rainhead also available. (LBRH)

Rain Gauge

Heavy duty reliable rain gauge complete with mounting bracket and screws.

Manhole Covers

A manhole cover is available as an option for every size tank. These can be used with or without strainer.

MPI Pumps

This exciting new range of MPI stainless steel pumps are fully enclosed allowing for surface or submerged installation.
These high quality Italian pumps have a 2 year warranty and are available in varying capacities and combinations i.e. full stainless steel or stainless steel/technopolymer.

Key features of these pumps are:

• IP68 rating.
• Automatic On/Off switching and constant pressure.
• Water cooled motor eliminating fan problems and need for air space/flow.

Vortex Fine Filter

Unique innovative Rainwater Filtering by Vortex Adhesion for Underground Tank Storage. Fitted to a horizontal drain pipe, it filters and diverts the rainwater to a storage tank. The incoming rainwater runs out of the horizontal drain pipe into the side of the Filter and is then led in a vortex to the filter housing below. There the rainwater is drawn through the vertically placed fine filter by adhesion and is led through the outlet to the storage area, whilst the dirt is rinsed away with the remaining water to drain. If necessary (for deeper underground installation) an extension pipe can be installed up to ground level (accessory). The rainwater inlet can be turned 360 in relation to the lower part. The central drain outlet is vertical so that pipes can be connected in any direction.
Particles larger than .44 mm are directly rinsed away into the drain.

FIlter features include:

• Capture more than 90% while cleaning your filter as well.
• Filtering to 0.44 mm all by gravity
• Intended for below ground installation
• Withstands up to 30 tonne vehicles
• Ideally used with Polymaster Underground Tanks
• How the Vortex Filter works

First Flush Water Diverter (FFWD)

This FFWD has been designed to fit onto the outside of most round tanks to keep your rainwater extra clean.
It will fit almost any round tank in our range (RWT1600 – RWT31700).

Special Features:

• Large 60 litre capacity and available in all tank colours.
• Easily attached through specially designed manhole covers on the roof of the tank.
• Collects the first 60 litres of sedimented run-off, keeping it from entering the main tank.
• Fits into new style manhole cover and can be fitted to existing tanks.
• Catchment tank can be easily cleaned.
• Special manhole covers are included with the First Flush Water Diverter if ordered with a new tank.

Water Level Indicators

Rain Alert (RALM)

Rain Alert wireless level indicator. A wireless measurement device that allows you to monitor the level
of your tank/s from the comfort of your own home.

CFA Coupling and Cap

A fire fighting fitting ready for instant hook on by country fire-fighting authorities. VIC and SA couplings available.

• CFA2 includes 65 mm coupling, 50 mm outlet and tested and approved gate valve.
• Optional CFA cap screws on to seal coupling.

Water Filters

Special Features:

• Removes dirt, rust, sediment, taste and odour when used with a carbon cartridge.
• Easily fits inline on pipe work.
• PM10M will fit under sink/hand basin or onto tank.
• PM201 designed for a whole house.
• Other filters available.

Tank Fire Fighting Kit

All fittings included as shown. This versatile tank fire fighting kit is both compact and portable. All fittings supplied for hook onto tank.

Equipped with:

• 5.5 hp motor and fire fighting pump.
• 36 mtr fire hose reel.
• Heavy duty galvanised frame.

Leaf Eater Water Diverter

This first flush device fits to the downpipe and comes in a kit form – just add pipe. Takes the first flow of water from the roof gutter, seals it off and then automatically diverts the flow to the tank.